Kawai CP67 - Manual (Page 7)

– 7 –
6. Maintaining a firm grasp under the front of the main, unit
slide it toward the rear of the stand until the hook brackets engage
the brackets at the rear top of the side panels (A). This hook
arrangement is design to prevent the main unit from tilting
forward while the screws are installed. Keep one hand under
the front of the main unit, push down on the front to be certain
that hooks are properly engaged.
7. Fasten the main unit and the stand with four screws (D).
CAUTION:
Be sure to secure the main unit to the stand with the screws.
If you fail to do so, the unit could fall from the stand causing
damage or personal injury.
Bottom View
(H)
8. Insert the pedal connection cord that comes
from Pedal Board (C) into the piano’s pedal jack
and fasten with cord clamps.
9. Turn the adjuster (installed on the bottom of
the Pedal Unit) down until it makes firm contact
with the floor. If the floor is carpeted, place a
spiked furniture cup under the adjuster so that it
makes firm contact with the carpet backing.
Press any pedal with your foot. If the pedal rail
flexes, lower the adjuster until flexing is
minimized.
CAUTION:
Before moving your piano, turn the adjuster
up so that it clears the floor.
Attaching The Headphone Hook (Option)
Fix the headphone hook to the bottom of the piano with two screws packed in the same plastic bag.