Konica Minolta MS6000 MKII - Manual (Page 27)

1-6
Sa
fety
Not
e
s
Cha
p
ter 1
2. Turning the Power On and Off
Turning ON
Press the Power Switch of the
scanner to the I (ON) position.
Press the Power Switch of the printer
to the I (ON) position.
The Control Panel displays a blinking
“1” and the unit starts to warm up.
The unit is ready to read data when
the “1” stops blinking.
Useful Tips
If you load the film in the film carrier and
press the start button while the printer is
warming up, you can scan and memorize
the film image of about 9 pages (Letter or
A4 size/400dpi) into this system.
And then, printer allows that print process
to be started as soon as the printer
completes warming up.
At this time, both ends of Exposure
Display blink.
If you want to disable this function, ask
your authorized Technical Representative
to make change the system setting.
1
2
MSP 3000 Printer
3
Darker
Auto
Lighter