Konica Minolta MS6000 MKII - Manual (Page 91)

2. Initial Settings
4-6
Mi
s
c
e
llaneo
us
Ch
apte
r 4
Entering and Leaving the User Mode
Hold down the Shift key and Output Selection key at the same time for 0.5 sec.
The Multi-Print Display displays a “U.”
Press the Exposure Adjustment key (Darker or Lighter) to select the specific function.
Pressing the Darker key selects the function in the following order: U
→ U1
→ U2 → U3 .. → U8.
Pressing the Lighter key selects the function in the following order: U8
→ U7
→ U6 → U5 .. → U.
Press the Exposure Mode key to display d(*).
*: Current setting value
Press the Exposure Adjustment key (Darker or Lighter) to select the specific setting
value.
Pressing the Darker key selects the setting value in the following order: d0
→
d1 ..
Pressing the Lighter key selects the setting value in the following order: d5
→
d4 ....d0
Press the Start key to validate the setting value.
If the Exposure Mode key is pressed, the setting value is not validated and the User
mode initial screen (U) appears.
If a new function is to be set, start the procedure over beginning with step 2.
Press the Clear key.
This lets you leave the User mode, returning back to the ordinary mode.
1
O utput
S election
S hift
U ser Mode
2
D arker
L ighter
3
A uto
Z oom clr
4
D arker
L ighter
5
S tart
6