Konica Minolta MS6000 MKII - Manual (Page 51)

2-22
Sc
ann
er
Ch
apte
r 2
10. Selecting the Film Type
Auto
The system will automatically
determine the polarity of the film
being used when Auto is selected
with the Film Type key.
NOTE
• The system cannot determine the
polarity of certain types of film. Should
this occur, the film type should be
selected manually.
• The system does not detect exterior
conditions such as when the glass
surface of the Carrier is dirty or
scratched.
Nega (negative film)
If negative film is to be used, press
the Film Type Key to select Nega.
Posi (positive film)
If positive film is to be used, press the
Film Type Key to select Posi. 1
Nega/Posi
Film Type
Auto
Nega
Posi
1
Nega
Film Type
Auto
Nega
Posi
1
Posi
Film Type
Auto
Nega
Posi