Kyocera Jax S1300 - Manual (Page 31)

31
– Select New Msg to create a new
preset message.
2. Enter or edit the text.
3. Select Save .
Note: You can also save messages you have
written or received as preset messages.
Set Callback Number
1. From Callback Number , select one
the following:
– MDN sends your phone’s number.
Select OK to confirm.
– None sends no callback number.
Select OK to confirm.
– Custom allows you to enter a number.
Select Next to continue.
2. Enter number in the text field.
3. Select OK to save the number.
Enable Auto Save
From Auto Save , select one of the
following options:
• Do Not Save does not save
outgoing messages.
• Prompt allows you to choose whether or not
to save your message when you send it.
• Auto Save saves all outgoing messages to
Sent Msgs .
Enable Auto-Erase
Use Auto-Erase to set your phone to erase
messages automatically when needing memory
for incoming messages.
From
Auto-Erase , select one of the following:
• Disabled erases no messages.
• Inbox Msgs erases old messages in Inbox
when memory is needed.
• Sent Msgs erases old messages in Sent Msgs
when memory is needed.
• Both erases old messages in both Inbox and
Sent Msgs when memory is needed.
Set Entry Mode
You can change the default text entry mode when
creating a text message. This setting applies only
to the message body screen, not the “To” screen.
From
Entry Mode , select one of the
following options:
• Abc enter text letter by letter in sentence case.
• ABC enter text letter by letter in uppercase.
• 123 enter numbers.
• Rapid enter text with word recognition.