Kyocera Jax S1300 - Manual (Page 56)

56
Set Contrast
1. From Contrast , scroll to change the
brightness level.
2. Select Save .
Set Time and Date Format
From Time/Date Format , select a time and
date format.
Set Language
From Language , select a language.
Sounds
Your phone has several settings that control the
sound. You can select from a variety of ringers
and control the volume.
Ringers
You can change the ringer for your phone. You
can also assign ringers for different tasks.
Set Ringers
1. From Ringers , select Ringer Type .
2. Select a ringer. (Scroll down the list to play
the ringers.)
Enable Roam Ringer
From Ringers , select Roam Ringer > Enabled to
activate a specific ringer for roaming calls.
Set Ringer Mode
Your phone is set to make sounds when you
receive calls, press keys, navigate through menus,
and receive alerts (such as new messages). You
can silence all sounds and set the phone to vibrate
or light up when you receive calls and alerts.
From
Ringer Mode , select one of the following:
• Normal Sounds rings for the incoming call or
alert (in effect, returning the phone to a
non-silent mode).
• Vibrate Only vibrates for the duration of the
incoming call or other alerts.
• Vibe then Ring vibrates for the first ten
seconds and then rings for the remainder of
the incoming call alert.
• Lights Only lights up for the duration of the
incoming call or other alerts.
You can also press and hold the # Space key to
toggle between Vibrate Only mode and
Normal Sounds mode.
Note: The phone rings when attached to an
external power source (such as a charger), even
if all sounds have been silenced.
Volume
Control the volume of your phone’s features.
Set Ringer Volume
1. From Volume , select Ringer Volume .
2. Scroll right or left to set the ringer volume.
3. Press the OK key to save.