Kyocera Jax S1300 - Manual (Page 53)

53
Enable Auto-Hyphenation
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan (or the North
American Numbering Plan).
From
Auto-Hyphen , select Enabled to turn on
auto-hyphenation.
Use 1-Touch Dialing
The 1-Touch Dialing feature is the fastest way
to call a speed dial location. To call a contact
with speed dial, press and hold the speed
dialing location.
If it is a two-digit location, press the first digit
briefly, then press and hold the second digit.
Note: To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a speed
dial location assigned to a contact.
From
1-Touch Dialing , select Enabled to turn
on 1-touch dialing.
Hold Call
Enable Hold Call
Use Hold Call to place incoming calls on hold
until you are ready to answer them.
1. From Hold Call , select Enabled .
If you have not recorded a hold message, you
need to record one, such as “Please hold. I’ll
answer in a minute.”
2. Record the message twice, as prompted.
3. Select Save or Options and one of
the following:
– Play to replay your message.
– Re-Record to record your
message again.
– Exit to exit.
The next time a call comes in, you can place
it on hold.
Place a Call on Hold
You can place a call on hold with
Hold Call enabled.
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. With no call waiting enabled, the call
goes to
Voicemail .
When a call comes in, do the following:
1. Select Options > Hold Call to place
the caller on hold with your recorded
hold message.
2. Select Answer to speak to the caller on hold
or End Call to hang up without speaking.
Change Hold Call Message
1. From Hold Call , select Re-Record Msg .
2. Record the message twice, as prompted.
3. Select Save to save the message or Options
and one of the following:
– Play to replay your message.