Programmed play (pgm mode), Preparation, Press so that the “pgm” indicator lights – Kenwood DPF-R 3030 User Manual
Page 13: Start playback, Program desired tracks, Load a disc in the cd player, Repeat steps 1 , 2 and 3 above, Select the disc. go to step 2 within 8 seconds, Set the entry. go to step 3 within 8 seconds, Main unit remote control unit
13
Programmed play (PGM mode)
Use the following procedure to program desired tracks in a
desired order. (up to 32 tracks)
÷ Load a disc in the CD player.
Press so that the “PGM” indicator lights.
1
Preparation
Do this operation in the stop mode.
÷ Up to 32 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
÷ If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
÷ When the 4 or ¢ key is pressed during playback, the track will be
skipped in the direction of the pressed button.
Start playback.
3
4
Repeat steps
1, 2 and 3 above.
Program desired tracks.
2
1
Select the disc.
Go to step
2 within 8 seconds.
3
Set the entry.
Go to step
3 within 8 seconds.
2
Select the desired track No.
Press the numeric keys as shown below....
To enter track No. 25 : +10, +10, 5
Blinks.
CD-406/DPF-R6030
CD-404/403/DPF-R4030/R3030
Light up.
Track number
CD-404/403/DPF-R4030/R3030
Main unit
Remote control unit
CD-406/DPF-R6030
MULTI
EDIT
FILE
RANDOM
AUTO
PAUSE
B
A
5
4
3
2
1
PGM
P.MODE
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
1
2
3
4
5
6
7
8
9
0
+10
P.MODE
10
9
TOTAL
ALL
20
19
18
17
16
15
14
13
12
11
0
REPEAT
MULTI
EDIT
FILE
RANDOM
AUTO
PAUSE
P.C.
P.C.
B
A
5
4
3
2
1
TRACK NO.
DISC
PGM
SINGLE
NO.
8
7
6
5
4
3
2
1