Select the disc, Select the new track no, Set the entry – Kenwood DPF-R 3030 User Manual
Page 14: Select the desired track no, Press the p.mode key, Main unit remote control unit
14
To check or change the programmed tracks
1
Press the CHECK key.
Press until the track
No. to be changed is
displayed.
2
Select the disc.
3
Select the new track No.
4
Set the entry.
To add a track to the program
1
Select the disc.
2
Select the desired track No.
3
Press the P.MODE key.
Blinks.
÷ Perform only step 1 to simply check the program.
÷ Each time the key is pressed, the program No. and the track No. on CD
are displayed.
÷ Press it while the “PGM 01” indicator blinks. (CD-406/DPF-R6030 only)
÷ Press the key while the “P.C.” indicator is lit. (CD-404/403/DPF-R4030/
R3030 only)
÷ The track being played cannot be changed.
Example
≠
÷ When a track No. is selected, the track will be added to the end of the
existing program.
÷ The programmed contents remain in memory.
To stop playback
Programmed play (PGM mode)
CD-406/DPF-R6030
CD-404/403/DPF-R4030/R3030
Main unit
Remote control unit
Light up
CHECK
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
1
2
3
4
5
6
7
8
9
0
+10
P.MODE
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
1
2
3
4
5
6
7
8
9
0
+10
P.MODE
10
9
8
7
6
5
4
3
2
TOTAL
ALL
20
19
18
17
16
15
14
13
12
11
0
REPEAT