Kenwood DPF-R 3030 - Manual (Page 20)

20
To clear the edited contents
To check the edited contents
÷ When the CHECK key is pressed, track numbers and remaining time in
the file A are displayed first, then those in the file B.
Playing or recording the edited contents
Press the 6 key to start playback according to the edited
content. The playback pauses at the beginning of the track
edited for tape side B. Press the
6 key again to continue
playback.
Press any one of these keys.
Do this operation in the stop mode.
Notes Notes Notes
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or the
last track on side A or side B may be cut short.
2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.
Note Note Note
Editing
CD-406/DPF-R6030
CD-404/DPF-R4030
P.C. indicator light up.
÷ When the CHECK key is pressed, the track Nos. of edited songs will
automatically be displayed in the order they are edited.
÷ Do not adjust the output level from this unit particularly during record-
ing.
÷ With the CCRS function, the recording starts after about 1 minute.
÷ If you have a cassette deck capable of Double-speed recording, use
Normal-speed recording.
÷ For details, see the instruction manual of the cassette deck.
When recording the edited content onto a tape, it is recommended
to use the synchro recording or CCRS recording function of
KENWOOD cassette decks.
CHECK
P.MODE
CLEAR
5 REPEAT SINGLE
10 9 8 7 6
4 3 2
20 19 18 17 16
15 14 13 12 11
TOTAL ALL
0
TRACK NO.
DISC
NO.
P.C. P.C. 1
OPEN/CLOSE