Kohler 8030A User Manual
Page 8
8
1071288-AN2-F 09/03/12
6. Applying pressure evenly, press the membrane seal into the sprayhead
groove.
Install the Sprayface
1. Tilt the sprayhead downward so that the ribs on the top of the sprayhead are
exposed.
Note! For product with brushed finishes, align the brush pattern of the sprayfaces
with the direction of the brushed pattern of the concealing plate.
2. Insert the grooves of the sprayface over the ribs of the sprayhead.
3. Press the sprayface down to cover the sprayhead, as illustrated.
4. Using a 5/64” hexagonal wrench, turn the setscrews anti-clockwise until they
are flush with the edge of the sprayface frame.
Important! The setscrews must be flush with the edge of the sprayface frame.
If the setscrews protrude outside the sprayface frame, product damage will
occur.
5. Repeat for the remaining sprayfaces.
Setscrews
Sprayface
Ribs
Finished Ceiling