KORG Kaptivator KTV1 - Manual (Page 35)

33
Owner’
s Manual
Start Variation list
No. Operation
T1 Clip starts immediately when pad is pressed
T2 Clip is selected when pad is pressed, starts at the beginning of the measure
T3 Clip is selected when pad is pressed,starts when external audio level exceeds trigger level
T4 Clip plays only while pad is pressed, and pauses when released
Press the same pad to resume playing this clip from the current position, or a different pad to start a new clip
from the begining
T5 Clip starts when pad is pressed, and pauses when the same pad is pressed again (toggle).
Press the same pad to resume playing this clip from the current position, or a different pad to start a new clip
from the begining
Controller Assignment list
No. Target Range of change
A1 Audio level 00 (min.) – 99 (max.)
A2 Audio level 99 (min.) – 00 (max.)
A3 Audio level 99 (min.) – 00 (middle) – 99 (max.)
A4 Audio level 00 (min.) – 99 (middle) – 00 (max.)
B1 Beat 00 – 99 (in two beats)
B2 Beat 99 – 00 (in two beats)
B3 Beat 00 – 99 – 00 (in two beats)
B4 Beat 99 – 00 – 99 (in two beats)
C1 FX control ribbon [touch] 00 (release), 99 (touch)
C2 FX control ribbon [touch] 99 (release), 00 (touch)
C3 FX control ribbon [touch] 99
C4 FX control ribbon [touch] 00
D1 HOLD key 00 (off), 99 (on)
D2 HOLD key 99 (off), 00 (on)
D3 HOLD key 99
D4 HOLD key 00
E1 Ext value 00 (min.) – 99 (max.)
E2 Ext value*1 99 (min.) – 00 (max.)
E3 Ext value*1 99 (min.) – 00 (middle) – 99 (max.)
E4 Ext value*1 00 (min.) – 99 (min.) – 00 (max.)
F1 Slider [value] 00 (bottom) – 99 (top)
F2 Slider [value] 99 (bottom) – 00 (top)
F3 Slider [value] 99 (bottom) – 00 (middle) – 99 (top)
F4 Slider [value] 00 (bottom) – 99 (middle) – 00 (top)
G1 FX control ribbon [value] 00 (bottom) – 99 (top)
G2 FX control ribbon [value] 99 (bottom) – 00 (top)
G3 FX control ribbon [value] 99 (bottom) – 00 (middle) – 99 (top)
G4 FX control ribbon [value] 00 (bottom) – 99 (middle) – 00 (top)
H1 FX control knob [value] 00 (min.) – 99 (max.)
H2 FX control knob [value] 99 (min.) – 00:0 (max.)
H3 FX control knob [value] 99 (min.) – 00 (middle) – 99 (max.)
H4 FX control knob [value] 00 (min.) – 99 (middle) – 00 (max.)
*1: Ext value: The value you specify by holding down the YES/WRITE key and turning the
VALUE knob will be specified as the value of the style edit parameter. (By default, this will
be Dissolve Rate: the time over which mixing between clips is performed.)