Kodak INNOVATION I100 - Manual (Page 7)

4 A-61514 September 2004
Safety information
• When placing the scanner, make sure that the electrical power outlet is
located within 1.52 metres (5 feet) of the scanner and is easily accessible.
CAUTION: The scanner and power supply must only be used indoors in a
dry location.
• Material Safety Data Sheets (MSDS) for information about chemicals
used in Kodak products are available on the Kodak web site at
www.kodak.com/go/MSDS. Refer to Appendix B, “Supplies and
Accessories,” for catalog number information.
Warning labels
WARNING: The scanner cover must be in place and closed during
scanner operation.
User precautions
Users and their employer need to observe the common sense precautions
applicable to the operation of any machinery. These include, but are not limited
to, the following:
• Do not wear loose clothing, unbuttoned sleeves, etc.
• Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.
• Hair should be kept short, using a hair net if needed or by tying long hair up
in a bundle.
• Remove all loose objects from the area that could be drawn into
the machine.
• Take sufficient breaks to maintain mental alertness.
• Follow the recommended Kodak cleaning procedures. Do not use air, liquid
or gas spray cleaners. These cleaners only displace the dust, dirt or debris
to another location within the scanner, which could cause the scanner to
malfunction.
Supervisors should review their practices and make the compliance with
these precautions a part of the job description for the operator of the
Kodak i100 Series Scanners and any other mechanical devices.
CAUTION: Moving parts. Avoid contact.
CAUTION: Hot surface. Avoid contact.