Kenwood DT-7000S - Manual (Page 6)

DT-7000S Instruction Manual 6
Controls
and Features
POWER Button (unit only):
Turns the DT-7000S on and puts it into the Standby mode.
Power Off/On Buttons (remote only):
Emit discrete codes to turn the DT-7000S off and on.
Category Jog Dial (unit)/CAT Buttons (remote):
Puts the DT-7000S into the Category Select tuning mode and
accesses different entertainment categories; accesses differ-
ent selections in the Setup mode (see pages 7 & 10).
Number Buttons:
Sets and selects stream presets; selects alphanumeric charac-
ters for naming Preset Banks (see pages 8 – 9).
Preset Bank Indicators:
Shows which of the four Preset Banks is currently active.
MEMORY Button:
Saves & recalls song & artist information; sets Lock Code
number (see pages 9 & 12).
DISPLAY Button:
Switches the display between different modes (see page 10).
SEEK MODE Button:
Switches the action of the CH./PRESET Jog Dial and CH
Buttons between the Stream and Preset seek modes.
CH./PRESET Jog Dial (unit)/CH Buttons (remote):
Accesses Streams and Presets.
STANDBY Indicator (unit only):
Illuminates when the DT-7000S is in the Standby mode.
Remote Control Receiver:
Receives signals from the included IR remote control.
DIRECT Button:
Accesses streams directly by number: Press DIRECT, then use
the number buttons to enter the stream number.
SETUP Button:
Enters and exits the Setup mode (see page 10).
BANK Button:
Cycles-through the four banks of stream presets (see page 8).
ENTER Button:
Press to select items highlighted on the display; hold-down to
jump to the previously-received stream.
CH SCAN Button (remote only):
Press to automatically scan through all of the available streams.
DIMMER Button (remote only):
Cycles the display between 3 brightness levels (see page 10).
DELETE Button (remote only):
Deletes characters from Preset Bank names (see page 9).
SPACE Button (remote only):
Puts spaces in Preset Bank names (see page 9).
Note: Buttons on the
unit and remote with
the same name have
the same function.