Konica Minolta DiMAGE Scan Multi PRO - Manual (Page 18)

18
4. Turn the terminator switch (Dip switch 1) to ON.
• An external terminator is not necessary with this
scanner.
5. Plug the power cord into the scanner’s AC
socket, then plug it into a grounded outlet.
IF THE DIMAGE SCAN MULTI PRO IS THE LAST OR ONLY
DEVICE IN YOUR SCSI CHAIN…
USING THE SCSI INTERFACE
6. Plug the power cord into the scanner’s AC
socket, then plug it into a grounded outlet.
NOTE:
This device is to be used with a power
source within the voltage as specified on
the back of unit.
NOTE:
Terminating the SCSI chain helps to
suppress electronic noise in the SCSI
chain.
Not terminating the SCSI chain can cause
slowdowns, data errors, crashes, and
other unpredictable errors.
NOTE:
This device is to be used with a power
source within the voltage as specified on
the back of unit.