Konica Minolta DiMAGE Scan Multi PRO - Manual (Page 19)

DiMAGE Scan Multi PRO
19
USING THE IEEE 1394 INTERFACE
The driver software only supports IEEE1394 connection with Windows®2000, Windows®Me and Macintosh OS.
This scanner has been packaged with the IEEE 1394 cable. For details, refer to the page 106.
With Macintosh made by Apple Computer, Inc., an IEEE1394 Interface is named “FireWire”. Therefore, interface
names of other related peripheral equipment may also be called “FireWire”.
Example:
Connect the IEEE 1394 Hub terminal
1. Turn the SCSI terminator
switch (Dip switch 4) to OFF.
2. Connect one end of the IEEE
1394 cable to either IEEE
1394 port on the back of the
scanner.
* The maximum number of items you can
connect to this terminal is 63. However, if
you use a daisy chain it is 16.
Before connecting the IEEE1394 Interface unit to a personal computer, install the driver
software of the DiMAGE Scan Multi PRO (see pages 20 and 23).
3. Connect the other end of the IEEE 1394 cable to
the IEEE 1394 port on the computer or the IEEE
1394 Hub terminal.