Kodak DCS300 - Manual (Page 212)

11-14
If you choose Update from card,
the screen at the left appears
briefly.
This screen then appears.
14 Choose OK or Cancel.
If you choose Cancel, the
firmware will not be updated.
If you choose OK, the Progress
screen appears.
If there is a problem loading the
firmware, an error message will
be displayed.
When the firmware has been
successfully loaded, this screen
appears.
15 Choose OK.
The Main Menu appears.
☛
To revert to an older version of
firmware, you must repeat
steps 10 - 14.