Operating instructions, Anti drip system, After each use – Kambrook KI400 User Manual
Page 10
10
Anti Drip System
The Kambrook SpeedSteam Iron is
equipped with an Anti-Drip System. The
iron will automatically close the steam
valve when the soleplate temperature
is too low to produce steam. When this
happens you will hear a click sound. It is
safe and will not harm the performance
of the iron.
This is the reason the Fine Mist Spray
should be used when ironing delicate
fabrics at low temperatures.
The steam valve will open once the
soleplate has reached the temperature
required to create steam.
After Each Use
Set the steam selector to the MIN position
and turn the Temperature Control to MIN.
Switch the power off at the power outlet
and disconnect the power cord from the
power outlet.
Open the Water Tank Inlet and (over a
sink or bucket) invert the iron to empty
the remaining water from the tank.
Stand the iron in an upright position and
allow to cool.
Operating Instructions
continued
KI400_KI460_IB_D12.indd 10
5/12/12 12:05 PM