How to use shot of steam, Vertical steam shot, Dry ironing – Kambrook KI400 User Manual

Page 9: Using the fine mist spray

Advertising
background image

9

How To Use Shot Of Steam

The shot of steam provides an extra burst

of steam which is ideal for the removal

of stubborn creases and wrinkles during

STEAM or DRY ironing.
Turn the Temperature Control to the

hottest setting and wait until the heating

indicator light goes out. Ensure the Steam

Control corresponds to the setting on the

Temperature Control.
Lift the iron slightly above the surface of

the fabric, press the Shot of Steam button

down firmly and release it during ironing.

An intense burst of steam penetrates

deep into the fabric.

NOTE: For optimal steam quality,

wait an interval of at least 4

seconds between presses of the

Shot of Steam button.

Vertical Steam Shot

The Vertical Steam Shot allows you to

use the iron for vertical applications. This

is especially useful for getting wrinkles

out of hanging garments, curtains, wall

hangings etc.
Hold the iron vertically, in front, a slight

distance from the item to be steamed

and press the Shot of Steam button.

CAuTION: Never use

the vertical steam shot

while clothes are on the

body or direct the steam

towards people.

Dry Ironing

Turn the steam selector to the

MIN position.
This shuts off the steam flow should there

be any water in the tank.
Select the required setting on the

Temperature Control for the fabric

being ironed.
Once the temperature has been

reached, the Heat Indicator Light will turn

off and the iron is ready for use.

Using the Fine Mist Spray

The Fine Mist Spray can be used to

dampen difficult fabrics, dry areas,

woollen items and accidental creases.

Firmly press the spray button (located on

the handle of the iron) to produce a fine

spray of water ahead of the iron.
The spray can also be used with delicate

fabrics (synthetic) which are ironed at

low temperatures and therefore cannot

be steam ironed.

NOTE: If the spray function is

operated during dry ironing,

ensure that there is sufficient

water in the water tank. If dry

ironing for more than 20 minutes,

the water tank should be

emptied to prevent over heating

any water present.

KI400_KI460_IB_D12.indd 9

5/12/12 12:05 PM

Advertising
This manual is related to the following products: