La Crosse Technology WT-5431 - Manual (Page 12)

12
2. ACTIVATING/DEACTIVATING THE ALARM
a. After entering the alarm setting mode, the alarm is activated (either
ALM1 or ALM2).
b. To toggle between activating and deactivating the alarm, press either
the ALM1 or ALM2 briefly. “(((1)))” or “(((2)))” will be displayed to
the right of the time display when the alarm is activated.
c. When the snooze bar is pressed, the display will scroll through the
Alarm 1 and 2 times in the lower left.
3. TURNING ALARM OFF (WHILE SOUNDING)
a. While either alarm is sounding, press the SNOOZE bar to disable the
alarm for the set duration (Section II. D.). If the duration is set to “0”,
the alarm will be disabled for 24 hours.
b. After the SNOOZE bar is pressed, the lower left will display the time
remaining on the snooze. The SNOOZE bar may be pressed at any time
to restart the snooze duration.
c. To disable the alarm for 24 hours, press any button other than
SNOOZE or projection keys.
H. CHANGING DISPLAY MODE (DAY, SECONDS, AND
TEMPERATURE)
There are six possible display modes to view the day, seconds, and temperature
(remote temperature is constantly displayed). To change the display (starting at
the default of Day.Month.Date /Remote Temperature):
1. Press and release the “MODE/+” button. The display should now show
month.day.year/remote temperature
2. Press and release the “+” button a second time and the display will now
show seconds/remote temperature
3. Press and release the “+” button a second time and the display will now
show alarm1 time/remote temperature
4. Press and release the “+” button a second time and the display will now
show alarm2 time/remote temperature
5. Press and release the “+” button a second time and the display will now
show indoor temperature/remote temperature
6. Press and release the “+” button a second time and the display will now
show day.month.date/remote temperature