La Crosse Technology WT-5431 - Manual (Page 7)

7
3. From –5h to –8h, a US map with the highlighted time zone will also be
displayed to the right of the time display.
4. Press and release the “SET” button to confirm the time zone setting, and to
advance to DST (Daylight saving time) setting.
D. DST (DAYLIGHT SAVING TIME) SETTING
Note: The DST default is “On”, meaning that the WWVB will automatically
change the time according to Daylight Saving Time in the spring and fall. For
areas that do not recognize DST changes (Arizona and parts of Indiana) turn
the DST “OFF”.
1. Press and release the “+” button to turn the DST off, as will be indicated by
the display of “OFF” in the time LCD.
2. Press and release the “SET” button to confirm the DST setting, and to
advance to select the length of the snooze.
E. ADJUSTABLE SNOOZE TIME
Note: The snooze length can be adjusted from 1 minute to 59 minutes. This
duration refers to the length of time the alarm will be disabled when the
“SNOOZE” bar is pressed. If set to “0”, activating the snooze will turn off the
alarm for 24 hours.
1. Press and release the “+” button to advance the snooze time from 0 (off ) to
59 minutes.
2. Press and release the “SET” button to confirm the snooze setting, and to
advance to manually set the time.
F. TIME SETTING
Note: When the WWVB signal is found, that time will over-ride the manually set
time.
1. Press and release the “+” button to select the hour. Note: when setting the
hour, “PM” will appear to the left of the hour display, if it is AM nothing
will be displayed.
-4h Atlantic Time
-5h Eastern Time (default setting)
-6h Central Time
-7h Mountain Time
-8h Pacific Time
-9h Alaskan Time
-10h Hawaiian Time
-11h, -12h Next two time zones West of HAW
0h Greenwich Mean Time
-1h, -2h, -3h Three time zones West of GMT