La Crosse Technology WT-5431 - Manual (Page 6)

6
is found during this period, the tower icon will not appear and the clock will
search again at 12:00 am the next night.
6. Either wait for the WWVB reception or manually set the time and date,
making sure to set the correct time zone.
III. PROGRAM MODE
To enter the Program Mode hold down the “SET” button for 1 second, until the time
zone (“-5” default) flashes in the lower left. Press the “SNOOZE” button at any
time to exit the Program Mode, or wait approximately 15 seconds for the projection
alarm to automatically return to normal operation.
A. PROGRAMMING SEQUENCE
1. Time Zone Setting
2. Daylight Saving Time ON/OFF
3. Adjustable Snooze
4. Hour Setting
5. Minute Setting
6. Year Setting
7. Month Setting
8. Date Setting
9. Day Setting
10. 12/24-hour Mode
B. FUNCTION BUTTONS
There are 7 function buttons located on the front of the projection alarm and one
on the top. The function buttons are labeled: ALM1/HOUR, ALM2/MIN, light
intensity icon, DISPL, light direction icon, SET, MODE/+, and SNOOZE (the
top bar).
C. TIME ZONE SETTING
1. Hold down the “SET” button for 1 second, the time zone (“-5” default) will
flash in the Date LCD.
2. Press and release the “+” button to select the appropriate time zone. There
are 13 time zones to choose from (based relative to the international time
standard of GMT (“Greenwich Mean Time).