Lexmark 4900 Series - Manual (Page 13)

Setting up the printer
Granting access to the software during installation
Third-party applications, including antivirus, security, and firewall programs may alert you about the printer software
being installed. For your printer to work properly, you must grant access to the printer software.
Setting up the printer as a copier only
Use the following instructions if you do not want to connect the printer to a computer.
Note: If you want to connect the printer to a computer, use the setup documentation and the printer software CD
that came with the printer.
1 Unpack the printer.
Note: Contents, such as the number of print cartridges, may vary by model.
1 Power cord
2 Printer software CD
3 USB cable or installation cable
Note: Your printer model may not come with a USB cable. Purchase a USB cable separately.
4 Networking Guide
Note: Your printer model may not come with this publication.
5 Quick Setup sheet
6 Print cartridges
Note: Your printer model may come with only one cartridge.
Setting up the printer
13