Lucent Technologies USS-720 - Manual (Page 7)

Information Manual, Rev. 1 Evaluation Kit for USS-720 Instant USB
September 1999 USB-to- IEEE 1284 Bridge
Lucent Technologies Inc. 1-7
13
Evaluation Kit Contents (continued)
■ \Win98:
— USS720.INF
// ISD USB Smart Cable Install file
— USS720.SYS // Release version of USS-720 USB Device Driver for Windows 98
— USS720CI.DLL // ISD USB Smart Cable PnP Class Installer
— USS720IN.DLL // ISD USB Smart Cable PnP Printer Port Monitor Installer
— USS720MN.DLL // Release version of ISD USB Printer Port Monitor
■
\Win98\Debug
— USS720.INF
// Debug version of USS720.INF for Windows 98
— USS720.SYS // Debug version of USS720.SYS for Windows 98
— USS720CI.DLL // Debug version of ISD USB Smart Cable PnP Class Installer
— USS720IN.DLL // Debug version of USS720IN.DLL for Windows 98
— USS720IO.H // Include file required when developing an interface to the USS-720
device driver
— USS720MN.DLL // Debug version of ISD USB Printer Port Monitor
■
\SAMPLES
— MakeFile
// MakeFile file required for building
— test.c // Sample source
— test.exe // Executable version of sample source
— test.rc // Resource file required for building
— Sources // Source file required for building
Hardware Requirements
In addition to the hardware included in the USS-720 Evaluation Kit, the following hardware is required in order to
use the kit:
■ Personal computer with 486 (or higher) processor with:
— 16 Mbytes of RAM.
— USB connector.
And one of the two following operating systems:
— Windows 98 or
— Windows 95 version 4.00.950b with the USB supplement (QFE 1214), also known as OSR2.1.
Note: No upgrade path is available from previous versions of Windows 95 version 4.00.950 to OSR2.1; Windows
95 version 4.00.950B (OSR2.0) must first be installed, and then the system can be upgraded to OSR2.1.
■
Printer or other peripheral device conforming to IEEE Standard 1284.