Liebert RCM8DO - Manual (Page 9)

Section 1: INTRODUCTION
Silence/Reset Switch
The Silence/Reset switch turns OFF the audible alarm. If DIP
Switch SW1-8 is ON, the common alarm relay output will reset
with the Silence/Reset switch.
ON/OFF Switch
The RCM8 has a power ON/OFF switch located inside the
enclosure. Refer to Figure 1 below. When wiring the dry contact
connections, this switch should be in the OFF position. For
normal operation, the switch should be in the ON position.
Figure 1. Component Arrangement
Liebert RCM8 • 3