Lyngdorf Audio MkIV - Manual (Page 5)

- 5 -
Unpacking and placement of the Millennium
The Lyngdorf Millennium is heavy and has no built in handles. Unpacking it can be a little
bit tricky. To prevent back or toe injuries, we strongly recommend you get someone to help
you when it's time to lift the amplifier out of the box. Or open the box, fold out the carton
flaps, without removing any packaging material, carefully turn the box upside down and
simply remove the box from the amplifier.
When you have carefully removed the unit and accessory kit from the carton, visually
check for shipping damage. Contact both the shipper and Lyngdorf Audio immediately if
the unit bears any sign of damage from mishandling. All Lyngdorf Audio equipment is
carefully inspected before leaving our factory.
KEEP SHIPPING CARTON AND PACKING MATERIALS for future use or in the
unlikely event that the unit needs servicing. If this unit is shipped without the
original packing, damage could occur and void the warranty.
Place the Lyngdorf Millennium near the digital sources, thus keeping interconnects
reasonably short. The Millennium may be placed on a shelf or in a cabinet where it's easy
to operate.
Note that adequate clearance for the AC cord, speaker cables and interconnects must be
left behind the Millennium. Due to the Millennium's high efficiency, it won't get very warm
even after hours of operation. This will give you great flexibility in terms of placement. Just
make sure that the ventilation slots at the upper section of the back panel are not covered.