Lexmark 7300 Series - Manual (Page 13)

Connecting directly to a telephone wall jack
Connect the printer directly to a telephone wall jack to make copies or send and receive faxes without using a
computer.
1 Make sure you have a telephone cord and a telephone wall jack.
2 Connect one end of the telephone cord into the LINE port of the printer.
LIN E LINE
EXT EXT
3 Connect the other end of the telephone cord into an active telephone wall jack.
Note: For more information on connecting the printer to telecommunications equipment, see the additional setup
instructions that came with the printer. Setup steps may vary depending on your country.
Connecting to a telephone
Connect a telephone to the printer to use the fax line as a normal telephone line. Then set up the printer wherever
your telephone is located to make copies or send and receive faxes without using a computer.
1 Make sure you have the following:
• A telephone
• Two telephone cords
• A telephone wall jack
2 Connect one telephone cord to the LINE port of the printer, and then plug it into an active telephone wall jack.
LIN E LINE
EXT EXT
LINE LINE EXT EXT
13