Lexmark 7300 Series - Manual (Page 20)

Using the control panel buttons and menus
Using the control panel
The display shows:
• All-In-One status
• Messages
• Menus
Note: Words on the display may be abbreviated or shortened using ellipses.
1
2
3
4
5 6 7
1
2
3
4
5 6 7
Press To
1 One-Touch Dial
buttons (1–5) Access any of the five programmed Speed Dial numbers.
2 Copy Mode Access the copy default screen and make copies.
Note: The mode is selected when the button light is on.
3 Scan Mode Access the scan default screen and scan documents.
Note: The mode is selected when the button light is on.
4 Fax Mode Access the fax default screen and send faxes.
Note: The mode is selected when the button light is on.
5 Fax Auto Answer Answer all incoming calls when the button light is on.
Note: For information on setting the number of rings before the machine will answer
incoming calls, see “Receiving a fax automatically” on page 53.
6 Redial / Pause • In Fax mode, redial the last number entered.
• Insert a three-second pause in the number to be dialed to wait for an outside line
or get through an automated answering system. Enter a pause only when you
have already begun entering the number.
7 Phone Book Access any of the programmed Speed Dial numbers (1–89) or Group Dial numbers
(90-99).
20