LevelOne FPS-2013TXU - Manual (Page 49)

Level One Printer Servers
Figure 32: Configure Port Handler
10. In the Host address IP field, enter the IP Address previously assigned to the LevelOne
Printer Server device.
11. In the Printer Name field, enter the Logical Port name on the LevelOne Printer Server.
(e.g.: L1)
Note: For LevelOne Printer Servers with one parallel port, the logical ports are named
L1, L2 and L3. For devices with three parallel ports, the logical ports are named L1 to
L8.
12. Click Finish, then select appropriate drivers for Windows 3.1, Windows 95/98 and
Windows NT 4.
13. The new Printer Agent will now appear in the Printer Agent List window
Repeat this procedure for any other ports on the LevelOne Printer Server, or for any other
logical printers you wish to use.
Workstation Configuration
Before attempting to install and configure Public Access Printers on your workstation,
ensure that:
• Novell IntranetWare Client v2.2 (or later) is installed on your PC
• You have access to the Novell Printer Manager utility (e.g. Nwpmw32.exe)
Procedure
1. Start the Novell Printer Manager utility.
2. Select Printer - New from the menu, then click Add.
3. Select the required printer and click Install, then Close.
- 46 -