LevelOne FPS-2013TXU - Manual (Page 83)

Level One Printer Servers
page printing on the first or last page of your document.
• Install the Apple LaserWriter 7 driver. You are having trouble
printing with the Apple LaserWriter 8 driver.
Problem No. 8 Why do I have trouble printing with the LaserWriter 8?
Solution No. 8 Your application software may not be compatible with the
LaserWriter 8 driver or your system may not meet the requirements
of the LaserWriter 8 driver. Use the Apple LaserWriter 7 driver
instead.
Problem No. 9 How come the colors on my printed output do not match the
colors on my computer screen?
Solution No. 9 When the printer receives a color file, it tries to match the printed
output color to the screen color. Sometimes the printer cannot
match up the colors as closely as wanted. To alleviate this problem,
perform the following steps:
• Choose Calibrated Color/Grayscale in the Print pop-up menu
in the Print Options dialog box. The printer will make
adjustments to match the colors.
• Check your monitor to make sure all settings (for example,
brightness) are adjusted correctly.
Problem No. 10 The blue color I chose on my computer screen is printing out
purple.
Solution No. 10 Choose Calibrated Color/Grayscale in the Print pop-up menu in the
Print Options dialog box.
Problem No. 11 When I send a print job, I get a PostScript Command error or
no print out.
Solution No. 11 Check the communication protocols. The computer, LevelOne
Printer Server and printer must all be configured to the same
communication protocol.(either Binary or ASCII).
To configure your system:
1. Choose which protocol you are going to use. You should check
your printer; it may not give you a choice.
2. Set your printer to the correct protocol
3. Use the computer’s print submenu to configure your computer
to use the protocol you have chosen.
4. Configure the LevelOne Printer Server to use the same
protocol as the printer and computer.
- 80 -