LevelOne FPS-2013TXU - Manual (Page 40)

NetWare
Print Server Mode - NDS
If Print Server - NDS Mode was chosen, the following screen will appear.
Figure 20: NDS Print Server Mode
Data
Print Server
Name Change the name of the selected LevelOne Printer Server if you
wish. (This field is also on the Configuration-System menu.)
NDS Tree Name Select the File Server's NDS tree name (root name)
Print Server
NDS Context Select Browse to view the NDS tree and select the appropriate
Context.
Polling Queue
Interval Defines how often the LevelOne Printer Server will poll the queues
to be serviced.
Job Notification
by Connection ID Set to Yes to receive a job notification at only the workstation
where the print job originated, No to receive a job notification at all
workstations that you have logged on.
Buttons
NetWare
Configuration Use this to configure the NetWare server. See the following section
for details.
Quickset This option will configure the NetWare server using default values.
See below for details.
Help View context-sensitive help.
Set to Default Replace the on-screen values with the default values. These are
NOT saved until you click Save to Device. (No changes are made to
the NetWare server.)
Save to Device Save any changes you have made to the LevelOne Printer Server
Cancel Ignore any changes made since the last Save operation; close the
window.
- 37 -