Lennox Hearth L20 BF-2 - Manual (Page 13)

INSTALLATION
PAGE 13
DOOR OPERATION (ALL MODELS)
The glass door is mounted on a hinge at the top of the firebox
and is secured in the closed position by the draw latch mounted
on the bottom of the firebox. The latch tension is preset at the
factory. Over time, adjustment of the latch tension may be nec-
essary to maintain a tight door seal. This adjustment can be
made by spinning the latching rod in the rod guide. Care should
be exercised to not adjust the tension too high.
If glass door removal is required for replacement or mainte-
nance, the door can be removed in the open position by lifting it
straight up and disengaging the hinge. Do not attempt to re-
move or replace broken glass in the door assembly. Contact
your Lennox dealer for glass replacement. To Remove Door:
1. Locate latch below door (see following picture). Pull latch
forward until bottom of door releases.
2. Swing bottom of door outward until door releases at top,
then lift door up and off.