Lyngdorf Audio Millenium ADC Analog/Digital Converter - Manual (Page 12)

1 2
Menu Operation
In the following the general menu operation is described with Display Timeout menu (used as an exam-
ple only).
The menus available depend on the selected input. All settings outside the common
menus apply to the selected input only. Please refer to the menu tree.
When The Millennium ADC is switched on select the menu by pressing and holding the right control but-
ton until the menu appears or press Menu on the remote control.
Pressing the Left / Right control buttons or Left / Right Arrow on the remote control toggles forwards /
backwards between the different menus. When the requested menu is reached (in this case the Display
Timeout menu).
Press and hold the right control button or press Enter on the remote control to access this menu.
Now the setting can be adjusted by pressing the Left / Right control buttons or Left / Right Arrow on the
remote control until the desired setting is reached. In this case Display Timeout is set to ‘On’.
To save the setting press and hold the right control button until the previous menu re-appears or press
Enter on the remote control.
Pressing and holding the left control button or pressing Menu on the remote control, at any time, will
exit the menu completely. If the actual setting was not saved fi rst, you will exit the menu without saving
the setting.
The Millennium ADC will automatically exit the menu if it has not been operated for
approximately 30 seconds.
Main Menu ADC
< Input Gain >
Main Menu ADC
< Display Timeout >
Display Timeout
Curr: Off New: Off
Display Timeout
Curr: Off New: On