Lyngdorf Audio Millenium ADC Analog/Digital Converter - Manual (Page 7)

7
Front Panel
1 2 3 6 4 5
Figure 1: Millennium ADC front panel.
The buttons/controls on the front panel of the TDAI 2200 can all be operated either with direct presses
or by operating the corresponding keys on the supplied remote control. All the keys on the front panel
[except the Mains switch (1)] are duplicated on the remote control as well.
1. Mains switch
Turns the power to the Millennium ADC on or off.
2. Left control button.
Multifunction button for switching the product on/off, input selection and menu operation:
On/Stand by: Press to switch the Millennium ADC on from stand by. Press and hold the button to
switch back to standby mode.
Input Selection: When the unit is switched ON press to toggle down
Menu Operation: Down/back button. Press to use the down function. Press and hold to use the
return function. See chapter 9.b, Menu Operation, for a more detailed description.
3. Display.
4. Lyngdorf logo.
Dimly illuminated in standby mode. Brightly illuminated when the Millennium ADC is on.
5. Receiver for the infrared remote control.
6. Right control button.
Multifunction button for switching the product on, input selection and menu operation:
On: Press to switch the Millennium ADC on from stand by.
Input Selection: When the unit is switched ON press to toggle up
Menu Operation: Up/select. Press to use the up function. Press and hold to use the select function.
See chapter 9.b, Menu Operation, for a more detailed description.
•
•
•
•
•
•