Lyngdorf Audio Millenium ADC Analog/Digital Converter - Manual (Page 8)

8
Rear Panel
Figure 2: Millennium ADC rear panel.
1. Binding post for phono ground.
2. Optional phono stage module.
3. Millennium ADC serial number label.
4. RS-232 AUX and INPUT RJ45 connectors.
The RS-232 communication connectors are for connection to a computer for fi rmware upgrade. Please
visit www.lyngdorf.com for instructions and available fi rmware.
5. Mains voltage input selector.
Selects the correct voltage for your location. This switch selects either 110-120 V or 220-240 V operation.
Always check that the correct voltage has been selected prior to connecting this unit
to an AC power source. Failure to do so may result in serious damage to the unit.
The warranty will not cover any damage caused by connecting to inappropriate AC
mains.
6. Phono input RCA connectors.
7. Unbalanced analog input RCA connectors.
8. Balanced analog input XLR connectors.
9. Unbalanced digital output RCA connector.
10. Balanced digital output XLR connector.
11. Optical digital output Toslink connector.
12. Lyngdorf Audio Millennium Link XLR 5 pin connector.
13. Mains input IEC 320 connector.
Millennium ADC
Phono Stage
L R
PHONO GROUND
4 1 2 3 5
6 9 10 11 12 13 7 8