Lexmark 1500 - Manual (Page 104)

5 Snap the lids closed.
6 Close the access cover.
7 Press .
Memory card reader and PictBridge troubleshooting
Memory card cannot be inserted
There are possible solutions. Try one or more of the following:
Check memory card type
Make sure that the type of memory card you are using can be used in the printer. For more information, see “Inserting
a memory card” on page 31.
Check memory card placement
Make sure you have inserted the memory card in the correct slot. For more information, see “Inserting a memory
card” on page 31.
Nothing happens when memory card is inserted
These are possible solutions. Try one or more of the following:
Reinsert the memory card
The memory card may not have been inserted properly. Remove the memory card and then reinsert it.
Check memory card type
Make sure that the type of memory card you are using can be used in the printer. For more information, see “Inserting
a memory card” on page 31.
Check memory card placement
Make sure you inserted the memory card into the correct slot. For more information, see “Inserting a memory card”
on page 31.
Check to see if the memory card is damaged
Check to see if there is no obvious damage to the memory card. Remove memory cards properly from the printer
to avoid corruption of data.
Check the file types stored on the memory card
Make sure the file types stored on the memory card are supported by the programs installed on your computer.
Troubleshooting
104