Energy star, Power consumption, Product power consumption – Lexmark 1500 User Manual
Page 116: Power saver, Off mode, Energy star power consumption
ENERGY STAR
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode
Description
Power consumption (Watts)
Printing
The product is generating hard-copy output from electronic
inputs.
13.8
Copying
The product is generating hard-copy output from hard-copy
original documents.
not applicable
Scanning
The product is scanning hard-copy documents.
not applicable
Ready
The product is waiting for a print job.
7.5
Power Saver
The product is in energy-saving mode.
5.8
High Off
The product is plugged into a wall outlet, but the power switch
is turned off.
not applicable
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is
turned off, and the product is in the lowest possible power
consumption mode.
not applicable
Off
The product is plugged into a wall outlet, but the power switch
is turned off.
0.6
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. Se for current values.
Power Saver
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to
the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods
of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of
time, called the Power Saver Timeout.
Factory default Power Saver Timeout for this product (in minutes):
30
Off mode
If this product has an off mode which still consumes a small amount of power, then to completely stop product power
consumption, disconnect the power supply cord from the wall outlet.
Notices
116