High beams, Flash to pass, Panel dimmer control – Lincoln 2008 MKZ User Manual

Page 39: Lights

Advertising
background image

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.

Flash to pass

Pull toward you slightly to activate
and release to deactivate.

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel and all applicable
switches in the vehicle during
headlamp and parking lamp
operation.

Move the control to the full upright
position, past detent, to turn on the
interior lamps.

At dusk and dawn, the brightness
are illuminated to higher than
normal intensity to enhance contrast and visibility. The system
automatically “dims down” as ambient light reaches the dash-mounted
sensor. The interior control lights dim progressively in four steps until
they reach nighttime operating levels. Certain displays like the message
center and the climate control unit do not change with the dimmer
control till the dash-mounted sensor senses full night conditions.

OFF

2008 MKZ (378)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

39

Advertising