Reducing speed while using speed control, Turning off speed control, Steering wheel controls – Lincoln 2008 MKZ User Manual

Page 62: Driver controls

Advertising
background image

Reducing speed while using speed control

There are two ways to reduce a set
speed:
• Press and hold the SET - control

until you get to the desired
speed, then release the control.
You can also use the SET -
control to operate the Tap-Down
function. Press and release this
control to decrease the vehicle
set speed in small amounts by 1
mph (1.6 km/h).

• Depress the brake pedal until the desired vehicle speed is reached and

press the SET + control.

Turning off speed control

There are two ways to turn off the speed control:
• Depress the brake pedal. This will

not erase your vehicle’s
previously set speed.

• Press the speed control OFF

control.

Note: When you turn off the speed
control or the ignition, your speed
control set speed memory is erased.

STEERING WHEEL CONTROLS

Driving while distracted can result in loss of vehicle control,
accident and injury. Ford strongly recommends that drivers use

extreme caution when using any device that may take their focus off
the road. The drivers primary responsibility is the safe operation of
their vehicle. Only use steering wheel controls and other devices not
essential to the driving task when it is safe to do so.

2008 MKZ (378)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

62

Advertising