Lincoln Electric POWER MIG 180 - Manual (Page 25)

B-12 OPERATION B-12
1. Follow the MIG welding steps in the previous sec-
tion.
2. Connect a bottle of 100% Argon shielding Gas per
previous section.
3. Disconnect Magnum 100L Gun.
4. Install optional K2532-1 Magnum 100SG spool gun
per instructions included with gun.
5. Set Gun selector toggle switch to Spool Gun posi-
tion. (See Figure B.20)
FIGURE B.20
6. Turn machine on and make weld per recommended
settings on Procedure Decal inside machine door.
POWER MIG (140, 180 MODELS)
SETTING UP AND MAKING A ALUMINUM WELD USING SPOOL GUN