Lowrance electronic LRA-1000 - Manual (Page 32)

26
4. Next use ↑ ↓ to highlight the
C
OPY
F
ROM
dialog box. Select your unit's
hard drive as the Copy-From location and press
ENT
.
5. Highlight the
C
OPY
button and press
ENT
.
To delete a data file:
1. Highlight
D
ELETE
from the File Information window and press
ENT
.
2. A confirmation message will appear. Press ← to
Y
ES
and press
ENT
.
To stop or play a data file:
1. Select the desired file from the Browse Files menu and press
ENT
.
2. If the file is currently in use, the Stop button will be on the menu. If
the file is not in use or if you halt its use by activating the stop com-
mand, the Play button will be displayed.
Stop button highlighted in File Information window (left). Play button
selected in File Information window (right).
3. To stop playing the chart currently in use, highlight
S
TOP
and press
ENT
. The play button will replace the stop button on the File Informa-
tion window. Press
EXIT
to return to the main page display.
4. To play the chart again, highlight
P
LAY
and press
ENT
. Press
EXIT
to
return to the main page display. The radar simulator will automati-
cally be turned on if you play a chart from the File Information menu.
To rename a data file:
1. Highlight
N
AME
at the top of the File Information menu and press
ENT
.
2. Press ↑ ↓ to change the first letter, then press → to move to the next
letter. Repeat these steps until the desired name has been entered.
3. Press
EXIT
repeatedly to get back to the main page display.
Radar Setup
The Radar Setup menu allows you to set up and adjust basic radar set-
tings, like Heading Line, Trigger Delay, Main Bang Suppression,