Lowrance electronic LRA-1000 - Manual (Page 40)

34
3. Press ↓ to call up the EBL-VRM menu. Select the last EBL-VRM op-
tion and press
ENT
. Press ↑|→ to make the VRM and EBL visible on
the screen, then press
ENT
.
This is a zoomed in view from the previous image, clearly showing the
radar target, Variable Range Marker and Electronic Bearing Line.
To reposition EBL and VRM:
1. Press ↓ to launch the EBL-VRM selection menu.
2. Select the EBL-VRM you want to reposition and press
ENT
.
3. Use ↑ ↓, ← → to move the EBL and VRM to the desired location.
Press
ENT
.
4. If you have more than one EBL-VRM on the radar display, repeat
these steps to reposition each EBL-VRM on the display.
Variable
Range
Marker
Electronic
Bearing
Line
Radar
Target