Lucent Technologies Voice Terminal 8434DX - Manual

1
DEFINITY
®
Enterprise Communications Server (ECS)
Release 5
8434DX Voice Terminal
Quick Reference
555-230-857
Comcode 107672982
Refer to the procedures on this card to use the
features on your 8434DX voice terminal. The features
here are listed in alphabetical order. In the spaces
provided, write the feature access codes for your
system. For more information about any of these
features, see your system manager or refer to the
DEFINITY
® Generic 1 and Generic 3 and System 75
8434DX Voice Terminal User’s Guide, 555-230-856.
USING THE SOFTKEYS
You can display any of the softkey features by pressing
and then the softkey below the feature
abbreviation. If the feature you want to use is not on
the bottom line of the screen, press
or
until you see the feature you wish to access.
When the feature is active, an arrow appears above
the feature. (However, if the feature requires you to dial
a telephone number or extension, such as Call
Forwarding, you will temporarily see the digits you are
dialing, rather than the arrow, above the feature
name.)
To program/reprogram an AD button
1 Pick up handset.
NOTE: For speakerphone users, press a call
appearance button.
2 Press softkey below Prog (if shown on the display)
or Press
or Dial AD Program access code _________.
3 Press AD button to be programmed.
ABBREVIATED DIALING (AD)
Menu
Next
Prev
Program
8434dx.qref.def3 Page 1 Tuesday, October 21, 1997 1:56 PM