Lucent Technologies Voice Terminal 8434DX - Manual (Page 9)

9
To prevent the other party from hearing you
1 Press .
•
Red Mute light goes on.
2 Press again to resume talking to party.
•
Red Mute light goes off.
To change from speakerphone to handset
1 Pick up handset and talk.
To change from handset to speakerphone
1 Press .
2 Hang up handset.
To end a speakerphone call
1 Press again to hang up.
To see number stored on an AD button
1 Press the softkey below View (if shown on the
display)
or Press
.
2 Press selected AD button.
To see the last number you dialed
1 Press the softkey below View (for display users)
or Press .
2 Press the softkey below Last
or, if Last is not available on your display, press
or Dial the Last Number Dialed access code
_______.
To test the lights and the display on your voice
terminal
1 Press and hold down .
•
Green Test light goes on.
•
Button lights go on in four separate groups, and
all display segments fill in.
2 To end test, release .
STORED NUMBER (display feature)
TEST
Mute
Mute
Speaker
Speaker
Stored
Stored
LastDialed
Test
Test
8434dx.qref.def3 Page 9 Tuesday, October 21, 1997 1:56 PM