Lucent Technologies Voice Terminal 8434DX - Manual (Page 7)

7
To cancel a Leave Word Calling message
1 Press the softkey below CnLWC (if shown on the
display)
or Press
or Dial Leave Word Calling cancel code _______.
2 Dial extension.
To place a priority call (3-burst ring)
1 Press the softkey below PCall (if shown on the
display)
or
Press
or Dial Priority Calling access code _______.
2 Dial extension or wait for party to answer.
NOTE: You can use this feature only if the Reset Spkr
label appears under the button.
To adjust the speakerphone to the surrounding
room acoustics
1 While on-hook, press and then press
.
•
You hear a series of tones.
To select a personalized ring
1 If your 8434DX has a button, press
and then press ;
if your 8434DX has a button, press .
•
Current ringing pattern plays.
2 To cycle through all eight ring patterns:
if your 8434DX has a button, continue to
press (and then release) to hear each
subsequent pattern;
if your 8434DX has a
button, continue to
press (and then release) to hear each new
pattern.
NOTE: You can also press or to
cycle through the eight ringing patterns.
PRIORITY CALLING
RESET SPEAKERPHONE
SELECT RING (and RINGER VOLUME)
Cancel LWC
Priority
Speaker
Shift
Speaker
Shift Shift
Hold
Ring Ring
Shift
Hold
Ring
Ring
Next Prev
8434dx.qref.def3 Page 7 Tuesday, October 21, 1997 1:56 PM