Lexmark 4039-1XX - Manual (Page 20)

6 Service Manual
4039-1XX
37 Insufficient Memory Not enough memory for function
requested.To verify that the printer
recognizes all the installed memory, go
to the user menus and print the “Print
Menus” test page. Make sure the
memory shown on the printout matches
the installed memory.
38 Memory Full Memory used to store pages is full.To
verify that the printer recognizes all the
installed memory, go to the user menus
and print the “Print Menus” test page.
Make sure the memory shown on the
printout matches the installed memory.
39 Complex Page Page too complex to print.To verify that
the printer recognizes all the installed
memory, go to the user menus and print
the “Print Menus” test page. Make sure
the memory shown on the printout
matches the installed memory.
43 Font Card Not Supported Font card format not supported by
printer.
44 Defective Font Card Defective font card installed in font slot.
47 Font Card Removed While Printing Printer needs data on removed card.
52 Flash Full Not enough flash memory for data
requested to be stored.
53 Unformatted or Defective Flash Flash problem at POR or while
attempting to write.
54 Serial Error Framing or parity error on serial.
58 Duplex Not Attached Duplex is electrically connected but no
longer mechanically attached, and
printer top cover is closed.
59 Duplex Cover Open Top cover of duplex unit is sensed open.
62 Disk Full Not enough disk space for data that has
been requested to be written to disk.
Error/Code Action