Lanier 5415MFD - Manual (Page 125)

Copy Setting
Enhanced Programming 7 - 9
Setting DENSITY(ADF)
Adjust the copy image density level when optional Automatic Document Feeder is
installed. This setting will vary print density according to the type of originals frequently
used.
1
Press the "Program" key 2 times to display the message COPY SETTING.
2
Press "4" of Keypad. A message is displayed briefly to confirm your selection.
3
Press the Arrow keys to select Mode 1 or Mode 2 as the default setting.
Then press "Yes" key.
4
Press "No/Clear" key, to return to the initial state.
Setting 2in1 MODE
Set the initial value of 2in1 function. It is possible to set when additional memory is
installed.
1
Press the "Program" key 2 times then the display appears the message COPY
SETTING.
2
Press "5" of Keypad. A message is displayed briefly to confirm your selection.
3
Press the "Left" or "Right Arrow" keys to select ON or OFF as default setting and
press "Yes" key.
4
Press "No/Clear" key, to return to the initial state.
Setting Description Default
MODE 1 When the standard original (text original) is used. *
MODE 2 To give better reproduction of a faint original.