Pgm trigger assignment, Speaker configuration, Custom configuration – Lexicon MC-1 User Manual

Page 31: Ystem configuration, Front l/r, Adjust with or small small dipole small small yes

Advertising
background image

23

MC-1 Digital Controller

S

ystem

Configuration

Front L/R

Select LARGE for full-range front speakers to deliver full frequency
response to the front left and right outputs. Selecting SMALL activates
a 12dB per octave highpass filter and automatically routes low fre-
quency information to the subwoofer output. Choices of 40, 80 and
120 Hz are available for the -3dB point. The SMALL setting is recom-
mended unless your speakers are capable of handling full audio
signals, or are equipped with their own crossovers.

PGM Trigger Assignment

This menu item assigns the status for the programmable (PGM) trigger
on the MC-1 rear panel. +12VDC is provided for controlling ancillary
equipment or functions. Selections are ENABLE or DISABLE for the
selected input. The factory default is ENABLE (high) for A/V inputs and
DISABLE (low) for audio only inputs. (+5VDC is available via internal
jumper. Contact your dealer or Lexicon Customer Service to perform
this change.)

TRIGGERS

TRIGGERS

GND

PGM

PWR

IR IN

PGM GND PWR

Speaker Configuration

The Speaker Configuration menu allows a wide range of choices in
speaker type and room setups to provide optimal performance in
almost any room. An adjustable lowpass filter is available for the
subwoofer, as well as a highpass filter for all other speakers. The three
selections are for CUSTOM, THX or SURROUND EX configuration.

Custom Configuration

Press SELECT to open the CUSTOM CONFIG menu. Press SELECT
to access the selections for any highlighted menu item.

SETUP MENU

INPUT CONFIG

SPEAKER CONFIG

OUTPUT LEVELS

LISTENER POSITION

LOCK SETTINGS

CUSTOM CONFIG MENU

FRONT L/R
CENTER
SIDES
REARS
SUBWFR

Adjust with or

SMALL
SMALL

DIPOLE SMALL

SMALL

YES

LARGE, SMALL

LARGE, SMALL, NONE

LG or SM STD, LG or SM DIPOLE, NONE

LARGE, SMALL, NONE

YES, NO

The high pass filter attenuates low frequencies
at 12dB per octave. The values given are for the
-3dB point.

10

100

50

20

2k

1k

500

200

5k

10k

dBr

Hz

0.0

-1.000

-2.000

-3.000

-4.000

-5.000

-6.000

-7.000

-8.000

-9.000

-10.00

-11.00

-12.00

-13.00

-14.00

-15.00

-16.00

-17.00

-18.00

SPEAKER SETUP MENU

CUSTOM CONFIG

THX CONFIG

SURROUND EX CONFIG

Advertising