Battery saver, Securicode™ keyless entry system, Locks and security – Lincoln 2010 MKZ User Manual

Page 101

Advertising
background image

Battery saver

The battery saver will shut off the lamps 30 minutes after the ignition
has been turned to the 1 (off) position.
• If the dome lamps were turned on using the panel dimmer control, the

battery saver will shut them off 30 minutes after the ignition has been
turned to the off position.

• If the courtesy lamps were turned on because one of the vehicle doors

or the trunk was opened, the battery saver will shut off them off
10 minutes after the ignition has been turned to the off position.

• The battery saver will shut off the headlamps 10 minutes after the

ignition has been turned to the off position.

SECURICODE™ KEYLESS ENTRY SYSTEM

You can use the keyless entry
keypad to:
• lock or unlock the doors without

using a key.

• open the trunk.
• recall memory seat/power mirrors positions (if equipped).
The keypad can be operated with the factory set 5–digit entry code; this
code is located on the owner’s wallet card in the glove box and is
available from your authorized dealer. You can also create up to three of
your own 5–digit personal entry codes.

When pressing the controls on the keypad, press the middle of the
controls to ensure a good activation.

Programming a personal entry code and keypad association to
memory feature

To create your own personal entry code:

1. Enter the factory set code.

2. Within five seconds press the 1

• 2 on the keypad.

3. Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.

4. For memory recall feature, enter the sixth digit 1

• 2 to store driver 1

settings or 3

• 4 to store driver 2 settings.

Note: Pressing 5

• 6, 7 • 8, or 9 • 0 keypad numbers as a sixth digit

will not recall a driver memory setting.
Note: The factory-set code cannot be associated with a memory setting.

Locks and Security

101

2010 MKZ (378)
Owners Guide, 3rd Printing
USA
(fus)

Advertising