Replacing backup lamp/redundant tail lamp, Replacing high-mount brake lamp bulb, Lights – Lincoln 2010 MKZ User Manual

Page 65

Advertising
background image

Replacing backup lamp/redundant tail lamp

The backup lamp and redundant tail lamps are located in the trunk lid.
Follow the same steps to replace either lamp.

1. Make sure the headlamp switch is
in the off position and open trunk to
access the lamp assembly.

2. Position the decklid trim aside by
removing 3 to 4 pin-type retainers
to expose the lamp assembly.

3. Remove the bulb socket by
rotating it counterclockwise, then
pull it out of the lamp assembly.

4. Pull the bulb from the socket and
push in the new bulb.

5. Install the bulb socket into the
lamp assembly by rotating it
clockwise.

6. Carefully reposition the trim back
to its original position and secure
the retainers.

Replacing high-mount brake lamp bulb

1. Make sure the ignition control is
in the off position.

2. Open the trunk and reach
underneath package tray to locate
lamp assembly.

3. Remove the bulb socket by
rotating it counterclockwise, then
pull it out of the lamp assembly.

4. Pull the bulb straight from the
socket and push in the new bulb.

5. Install the bulb socket into the lamp assembly by rotating it clockwise.

Lights

65

2010 MKZ (378)
Owners Guide, 3rd Printing
USA
(fus)

Advertising